Q. Out of the following, which is the most important parameter for the blast furnace grade coke ?

View solution

Q. Presence of nitrogen in combustion air does not reduce the

View solution

Q. In flue gas analysis by Orsat's apparatus, oxygen is absorbed by

View solution

Q. Natural draft created by the chimney depends upon

View solution

Q. Coke oven gas after passing through return electrostatic tar precipitator (RETP) is used for the

View solution

Q. Calorific value of a typical dry anthracite coal may be around __________ Kcal/kg.

View solution

Q. The most matured coal out of the following is

View solution

Q. Presence of force moisture in coal is most disadvantageous during its

View solution

Q. Tar is a better fuel than furnace oil, because of its

View solution

Q. With increase in moisture content of coal, its

View solution

Q. Main constituent of natural gas is

View solution

Q. For the case of a fuel gas undergoing combustion with air, if the air/fuel ratio is increased, the adiabatic flame temperature will

View solution

Q. Pick out the wrong statement.

View solution

Q. Which of the following has the highest gross calorific value ?

View solution

Q. A liquid/gaseous fuel containing hydrocarbons and high amount of sulphur is burnt with 40% excess air. The flue gas still contains large amount of carbon monoxide. This may be due to the

View solution

Q. Efficient burning of anthracite coal requires

View solution

Q. C/H ratio is the minimum in case of

View solution

Q. Ignition temperature decreases progressively from anthracite to lignite, because

View solution

Q. Which of the following fuel gases is heavier than air ?

View solution

Q. Correct viscosity of furnace oil at the burner tip for proper atomisation is about 25 centistokes. To reduce the viscosity of high viscosity furnace oil (250 centistokes) to the correct atomisation viscosity (i.e. 25 cst), it should be preheated to about____°C.

View solution