Question
a.
low viscosity liquids (< 200 poise).
b.
high viscosity liquids (> 600 poise).
c.
large diameter tanks.
d.
none of these.
Posted under Basic Chemical Engineering
Interact with the Community - Share Your Thoughts
Uncertain About the Answer? Seek Clarification Here.
Understand the Explanation? Include it Here.
Q. Baffles may be eliminated for
Similar Questions
Explore Relevant Multiple Choice Questions (MCQs)
Q. Generally, as the length of the liquid path on a tray is increased beyond 5 ft, the overall column efficiency
View solution
Q. In packed absorption tower, onset of flooding usually occurs at a pressure drop of about __________ mm of water column per metre height of packing.
View solution
Q. For pipe flows, head is proportional to __________ at constant capacity (where D = pipe diameter ).
View solution
Q. Longitundinal stress induced in a thin walled cylindrical storage vessel is
View solution
Q. The type of stress developed in a metallic bar on subjecting it to a change in temperature without allowing it to be deformed is __________ stress.
View solution
Q. The safe distance of habitation from a hazardous chemical plant (TLV of its product < 1000 ppm) should be about __________ kms.
View solution
Q. Pick out the wrong statement pertaining to a shell and tube heat exchanger.
View solution
Q. Corrosion allowance in the design of pressure vessel/chemical equipment is not necessary, if
View solution
Q. Back-trapping in a distillation column results due to
View solution
Q. For a cylinderical vessel of moderate height, the weld joint efficiency for joints parallel to the cylinderical axis is given as 1.0, while for joints along the girth (circumference) it is given as 0.8. In calculating the shell wall thickness using code formula for an internally pressurised cylinderical vessel, what value of weld joint efficiency should be used ?
View solution
Q. Diameter of bubble caps used in high pressure columns is __________ as compared to that used in identical vacuum columns.
View solution
Q. The ideal size of round bubble caps to be used in industrial distillation column having a diameter of 3-6 metres is __________ cms.
View solution
Q. Lap joints are preferred for plates having thickness __________ mm.
View solution
Q. Maximum allowable vapour velocity in a bubble cap tower is determined by the
View solution
Q. Normally, the plate thickness of the bottoms and roofs of vertically cylindrical storage vessels as compared to that of the cylindrical shell is
View solution
Q. The practical representative values of HETP for a number of commercial operations lies within a range of __________ metre.
View solution
Q. Of the pressure vessels, with same thickness but different diameters, which one withstands higher pressure ?
View solution
Q. Reflux ratio variation in a distillation column is between
View solution
Q. In a distillation column, minimum clearance to be maintained betweeen the overflow weir and the last row of the bubble caps is __________ cms.
View solution
Q. Which of the following lengths of heat exchanger tubes are normally not used in practice ?
View solution
Recommended Subjects
Are you eager to expand your knowledge beyond Basic Chemical Engineering? We've handpicked a range of related categories that you might find intriguing.
Click on the categories below to discover a wealth of MCQs and enrich your understanding of various subjects. Happy exploring!