Q. Pick out the wrong statement pertaining to a shell and tube heat exchanger.

View solution

Q. Corrosion allowance in the design of pressure vessel/chemical equipment is not necessary, if

View solution

Q. Back-trapping in a distillation column results due to

View solution

Q. For a cylinderical vessel of moderate height, the weld joint efficiency for joints parallel to the cylinderical axis is given as 1.0, while for joints along the girth (circumference) it is given as 0.8. In calculating the shell wall thickness using code formula for an internally pressurised cylinderical vessel, what value of weld joint efficiency should be used ?

View solution

Q. Diameter of bubble caps used in high pressure columns is __________ as compared to that used in identical vacuum columns.

View solution

Q. The ideal size of round bubble caps to be used in industrial distillation column having a diameter of 3-6 metres is __________ cms.

View solution

Q. Lap joints are preferred for plates having thickness __________ mm.

View solution

Q. Maximum allowable vapour velocity in a bubble cap tower is determined by the

View solution

Q. Normally, the plate thickness of the bottoms and roofs of vertically cylindrical storage vessels as compared to that of the cylindrical shell is

View solution

Q. The practical representative values of HETP for a number of commercial operations lies within a range of __________ metre.

View solution

Q. Of the pressure vessels, with same thickness but different diameters, which one withstands higher pressure ?

View solution

Q. Reflux ratio variation in a distillation column is between

View solution

Q. In a distillation column, minimum clearance to be maintained betweeen the overflow weir and the last row of the bubble caps is __________ cms.

View solution

Q. Which of the following lengths of heat exchanger tubes are normally not used in practice ?

View solution

Q. A pipe is generally made of circular cross-section, because a circular cross-section has the

View solution

Q. In case of a shell and tube heat exchanger, the effect of L/D on inside film heat transfer co-efficient (hᵢ) vanishes after a Reynold number of

View solution

Q. In inclined long tube vertical evaporators, the tubes are inclined at an angle of

View solution

Q. In a continuous distillation column, the optimum reflux ratio ranges from __________ times the minimum reflux ratio.

View solution

Q. The wall thickness for a large high pressure pipeline is determined by the consideration of the

View solution

Q. In the case of a shell and tube heat exchanger, the logarithmic mean temperature difference

View solution