Q. If β is greater than zero, then choose the correct statement with respect to given relation
k = k0 (1 +β t)

View solution

Q. The unit of thermal conductivity doesn’t contain which parameter?

View solution

Q. The temperatures on the two sides of a plane wall are t1 and t2 and thermal conductivity of the wall material is prescribed by the relation
K = k0 e^(-x/δ)

Where, k0 is constant and δ is the wall thickness. Find the relation for temperature distribution in the wall?

View solution

Q. “If β is less than zero, then with respect to the relation k = k0 (1 + β t), conductivity depends on surface area”. True or false

View solution

Q. A cable of 10 mm outside is to be laid in an atmosphere of 25 degree Celsius (h = 12.5 W/m² degree) and its surface temperature is likely to be 75 degree Celsius due to heat generated within it. How would the heat flow from the cable be affected if it is insulated with rubber having thermal conductivity k = 0.15 W/m degree?

View solution

Q. Chose the correct one with respect to critical radius of insulation

View solution

Q. A heat exchanger shell of outside radius 15 cm is to be insulated with glass wool of thermal conductivity 0.0825 W/m degree. The temperature at the surface is 280 degree Celsius and it can be assumed to remain constant after the layer of insulation has been applied to the shell. The convective film coefficient between the outside surface of glass wool and the surrounding air is estimated to be 8 W/m² degree. What is the value of critical radius?

View solution

Q. For an object i.e. spherical the value of critical radius would be

View solution

Q. Maximum value of critical radius is

View solution

Q. An electric cable of aluminum (k = 240 W/ m degree) is to be insulated with rubber (k = 6 W/ square meter degree). If the cable is in air (h = 6 W/square meter degree). Find the critical radius?

View solution

Q. The value of critical radius in case of cylindrical hollow object is

View solution

Q. A wire of radius 3 mm and 1.25 m length is to be maintained at 60 degree Celsius by insulating it by a material of thermal conductivity 0.175 W/m K. The temperature of surrounding is 20 degree Celsius with heat transfer coefficient 8.5 W/ m² K. Find percentage increase in heat loss due to insulation?

View solution

Q. A pipe of outside diameter₂0 mm is to be insulated with asbestos which has a mean thermal conductivity of 0.1 W/m degree. The local coefficient of convective heat to the surroundings is 5 W/square meter degree. Find the critical radius of insulation for optimum heat transfer from pipe?

View solution

Q. For insulation to be properly effective in restricting heat transmission, the pipe radius r0 will be

View solution