Q. A steel rod is 2m long and 50mm in diameter. An axial pull of 100kN is suddenly applied to the rod. What will be the instantaneous elongation produced in the rod if E=22GN/m²?

View solution

Q. What will be the amount of axial pull be applied on a a 4cm diameter bar to get an instantaneous stress value of 143 N/mm²?

View solution

Q. What will be the instantaneous stress produced in a bar 10cm² in area ans 4m long by the sudden application of tensile load of unknown magnitude, if the extension of the bar due to suddenly applied load is 1.35mm if E = 2×10⁵ N/mm²?

View solution

Q. What is the strain energy stored in a body when the load is applied gradually?

View solution

Q. What is strain energy?

View solution

Q. What is the relation between maximum stress induced due to gradual load to maximum stress the sudden load?

View solution

Q. A tensile load of 60kN is gradually applied to a circular bar of 4cm diameter and 5cm long. What will be the stress in the rod if E=1×10⁵ N/mm²?

View solution

Q. A tensile load of 60kN is gradually applied to a circular bar of 4cm diameter and 10m long. What will be the stress in the rod if E=1×10⁵ N/mm²?

View solution

Q. A tensile load of 100kN is gradually applied to a rectangular bar of dimension 2cmx4cm. What will be the stress in bar?

View solution

Q. A tensile load of 100kN is gradually applied to a rectangular bar of dimension 2cmx4cm and length of 5m. What will be the strain energy in the bar if E=1×10⁵ N/mm²?

View solution

Q. A tensile load of 60kN is gradually applied to a circular bar of 4cm diameter and 10m long. What will be the strain energy absorbed by the rod if E=1×10⁵ N/mm²?

View solution

Q. A uniform bar has a cross sectional area of 700mm and a length of 1.5m. if the stress at the elastic limit is 160 N/mm, what will be the value of gradually applied load which will produce the same extension as that produced by the suddenly applied load above?

View solution

Q. A tension bar 6m long is made up of two parts, 4m of its length has cross sectional area of 12.5cm while the remaining 2m has 25cm. An axial load 5tonnes is gradually applied. What will be the total strain energy produced if E = 2 x 10⁶ kgf/cm²?

View solution

Q. What is the strain energy stored in a body when the load is applied with impact?

View solution

Q. What is the value of stress induced in the rod due to impact load?

View solution

Q. What will be the stress induced in the rod if the height through which load is dropped is zero?

View solution

Q. A weight of 10kN falls by 30mm on a collar rigidly attached to a vertical bar 4m long and 1000mm² in section. What will be the instantaneous stress (E=210GPa)?

View solution

Q. A load of 100N falls through a height of 2cm onto a collar rigidly attached to the lower end of a vertical bar 1.5m long and of 105cm² cross- sectional area. The upper end of the vertical bar is fixed. What is the maximum instantaneous stress induced in the vertical bar if E = 200GPa?

View solution

Q. A weight of 10kN falls by 30mm on a collar rigidly attached to a vertical bar 4m long and 1000mm² in section. What will be the strain (E=210GPa)?

View solution

Q. A load of 100N falls through a height of 2cm onto a collar rigidly attached to the lower end of a vertical bar 1.5m long and of 105cm² cross- sectional area. The upper end of the vertical bar is fixed. What is the maximum instantaneous elongation in the vertical bar if E = 200GPa?

View solution