E-PolyLearning

Discussion Forum

Que. In case of heat conduction through plane wall, which one of the following is not a correct assumption?
a. Steady state
b. Three dimensional heat flow
c. Volumetric heat generation must be constant
d. K must be constant
Correct Answer:Three dimensional heat flow
Confused About the Answer? Ask fellow aspirants for Details Here
Already Know Explanation? Add it Here to help others.

More Questions Like this:

Generally heat generated depends on some parameters. It is directly proportional to
Suppose heat is conducted due to electrons
Where, i = I/A and p is the resistivity, then
Which one of the following materials are quickly heated by applying high frequency?
The constants of integration are to be determined from the relevant boundary conditions which are
(i) t = t w at r = R
(ii) q g (π L R²) = -k (2 π R L) (d t/d r)
(iii) Increasing temperature gradient
Choose the correct option?
A 25 mm diameter egg roll (k = 1 W/m degree) is roasted with the help of microwave heating. For good quality roasting, it is desired that temperature at the center of roll is maintained at 100 degree Celsius when the surrounding temperature is 25 degree Celsius. What should be the heating capacity in W/m³ of the microwave if the heat transfer coefficient on the surface of egg roll is 20 W/m² degree?
For a plane wall of thickness l with uniformly distributed heat generation q g per unit volume, the temperature t₀ at mid plane is given by
In case when both the surfaces of plane wall are at different temperature, we get an expression i.e.

T MAX – T W2 /T W1 – TW2 = (B + 1)²/4B

What is the value of B?
There occurs heat conduction and internal heat generation at uniform rate within the conduction medium itself in the following cases
(i) Drying of concrete

(ii) Chemical processes

(iii) Fuel elements in a nuclear reaction

Choose the correct option
Dielectric heating apparatus consists of
Consider a slab of thickness δ with one side (x = 0) insulated and other side (x = δ) maintained at constant temperature. The rate of uniform heat generation within the slab is q g W/m³. Presuming that the heat conduction is in steady state and one dimensional along x direction, the maximum temperature in the slab would occur at x equal
The temperature distribution profile for a solid cylinder is
A hollow sphere (k = 30 W/m K) of inner radius 6 cm and outside radius 8 cm has a heat generation rate of 4000000 W/m³. The inside surface is insulated and heat is removed by convection over the outside surface by a fluid at 100 degree Celsius with surface conductance 300 W/m² K. Make calculations for the temperature at the outside surfaces of the sphere
A composite slab consists of 5 cm thick layer of steel (k = 146 kJ/m hr degree) on the left side and a 6 cm thick layer of brass (k = 276 kJ/m hr degree) on the right hand side. The outer surfaces of the steel and brass are maintained at 100 degree Celsius and 50 degree Celsius. The contact between the two slabs is perfect and heat is generated at the rate of 4.2 * 10⁵ k J/m² hr at the plane of contact. The heat thus generated is dissipated from both sides of composite slab for steady state conditions. Calculate the temperature at the interface
A solid sphere of 8 cm radius has a uniform heat generation of 4000000 W/m³. The outside surface is exposed to a fluid at 150 degree Celsius with convective heat transfer coefficient of 750 W/m² K. If thermal conductivity of the solid material is 30 W/m K, determine maximum temperature
If Q X is heat generated in at distance ‘x’, then heat conducted out at a distance (x + d x) will be
The temperature drop in a plane wall with uniformly distributed heat generation can be decreased by reducing
Identify the correct boundary condition for a hollow sphere with inside surface insulated.
A slab of insulating material of thickness 6 cm and thermal conductivity 1.4kJ/m hr deg is placed between and is in contact with two parallel electrodes, and is then subjected to high frequency dielectric heating at a uniform rate of 140,000kJ/m³ hr. At steady state coefficients of combined radiation and convection are 42 and 48 kJ/m² hr deg. If atmospheric temperature is 25 degree Celsius, find surface temperatures?
An 8 cm diameter orange, approximately spherical in shape, undergoes ripening process and generates 18000 k J/m³ hr of energy. If external surface of the orange is at 6.5 degree Celsius, find out the temperature at the center of the orange. Take thermal conductivity = 0.8 k J/ m hr degree for the orange material
For a cylindrical rod with uniformly distributed heat sources, the thermal gradient at half the radius location will be

View All Questions on: Conduction With Heat Generation

Management and Accounting

Human Resource Management Marketing and Marketing Management Financial Management and Financial Markets Cost Accounting Business Statistics