Q. What is the common effluent pipe from each house to a collection point called?

View solution

Q. ______ allow the water to soak into the ground.

View solution

Q. Oil and grease is the presence of inorganics in wastewater.

View solution

Q. The surfactants have ______ chains.

View solution

Q. Lipophilic end is water liking.

View solution

Q. The lipophilic end ______

View solution

Q. What is the size of the oil droplets?

View solution

Q. What is the colour of the emulsion?

View solution

Q. What is the size of dissolved oil droplets?

View solution

Q. _________ act as a coupling agent between oil oil/water phases.

View solution

Q. An emulsion is a _____ system.

View solution

Q. Surfactants and finely divided solids _____the stability of the emulsion.

View solution

Q. Organo clays are manufactured by modifying _____with quaternary amines.

View solution

Q. What is the range of charge present on bentonite?

View solution

Q. The design of oil/water separators is based on _________

View solution

Q. Compute the required pressure for the flotation thickener without recycle for the following information:

A/S = 0.008 mL/mg
Temperature: 20 degree Celsius
Air solubility: 18.7 mL/L
Recycle steam pressure: 275 kPa
Fraction of saturation: 0.5
Surface Loading rate: 8 L/m²/min
Sludge flow rate: 400 m³/d

View solution

Q. Determine the surface area for the following information.

A/S = 0.008 mL/mg
Temperature: 20 degree Celsius
Air solubility: 18.7 mL/L
Recycle steam pressure: 275 kPa
Fraction of saturation: 0.5
Surface Loading rate: 8 L/m²/min
Sludge flow rate: 400 m³/d

View solution

Q. Compute the required recycled rate for the flotation thickener with recycle for the following information:

A/S = 0.008 mL/mg
p = 275 atm
Temperature: 20 degree Celsius
Air solubility: 18.7 mL/L
Recycle steam pressure: 275 kPa
Fraction of saturation: 0.5
Surface Loading rate: 8 L/m²/min
Sludge flow rate: 400 m³/d

View solution

Q. Determine the surface area with recycle for the following information.

A/S = 0.008 mL/mg
Temperature: 20 degree Celsius
Air solubility: 18.7 mL/L
Recycle steam pressure: 275 kPa
Fraction of saturation: 0.5
Surface Loading rate: 8 L/m²/min
Sludge flow rate: 400 m³/d

View solution

Q. What is the velocity considered for a flotation thickener to remove oil?

View solution