Q. Estimate RMS pulse broadening per km due to intermodal dispersion for multimode step index fiber where length of fiber is 4 km and pulse broadening per km is 80.6 ns.

View solution

Q. Practical pulse broadening value for graded index fiber lies in the range of __________

View solution

Q. The modal noise occurs when uncorrected source frequency is?

View solution

Q. Disturbance along the fiber such as vibrations, discontinuities, connectors, splices, source/detectors coupling result in __________

View solution

Q. The modal noise can be reduced by __________

View solution

Q. Digital transmission is more likely to be affected by modal noise.

View solution

Q. A multimode step index fiber has source of RMS spectral width of 60 nm and dispersion parameter for fiber is 150 psnm⁻¹km⁻¹. Estimate rms pulse broadening due to material dispersion.

View solution

Q. A multimode fiber has RMS pulse broadening per km of 12 ns/km and 28 ns/km due to material dispersion and intermodal dispersion resp. Find the total RMS pulse broadening.

View solution

Q. Γg = dβ / C*dk. What is β in the given equation?

View solution

Q. Most of the power in an optical fiber is transmitted in fiber cladding.

View solution

Q. A single mode fiber has a zero dispersion wavelength of 1.21 μm and a dispersion slope of 0.08 psnm⁻²km⁻¹. What is the total first order dispersion at wavelength 1.26 μm.

View solution

Q. The dispersion due to material, waveguide and profile are -2.8 nm⁻¹km⁻¹, 20.1 nm⁻¹km⁻¹ and 23.2 nm⁻¹km⁻¹respectively. Find the total first order dispersion?

View solution

Q. Dispersion-shifted single mode fibers are created by __________

View solution

Q. An alternative modification of the dispersion characteristics of single mode fibers involves achievement of low dispersion gap over the low-loss wavelength region between __________

View solution

Q. The fibers which relax the spectral requirements for optical sources and allow flexible wavelength division multiplying are known as __________

View solution

Q. For suitable power confinement of fundamental mode, the normalized frequency v should be maintained in the range 1.5 to 2.4 μm and the fractional index difference must be linearly increased as a square function while the core diameter is linearly reduced to keep v constant. This confinement is achieved by?

View solution

Q. Any amount of stress occurring at the core-cladding interface would be reduced by grading the material composition.

View solution

Q. The variant of non-zero-dispersion-shifted fiber is called as __________

View solution

Q. Non-zero-dispersion-shifted fiber was introduced in the year 2000.

View solution

Q. For many applications that involve optical fiber transmission, an intensity modulation optical source is not required.

View solution