Q. High-performance microwave FETs are fabricated from ___________

View solution

Q. Gallium arsenide MESFETs are advantageous than Silicon FETs.

View solution

Q. The PIN-FET hybrid receivers are a combination of ______________

View solution

Q. PIN-FET hybrid receiver is designed for use at a transmission rate of _____________

View solution

Q. It is difficult to achieve higher transmission rates using conventional __________

View solution

Q. Which receiver can be fabricated using PIN-FET hybrid approach?

View solution

Q. A silicon p-i-n photodiode utilized with the amplifier and the receiver is designed to accept data at a rate of ___________

View solution

Q. What is usually required by FETs to optimize the figure of merit?

View solution

Q. How many design considerations are considered while determining the receiver performance?

View solution

Q. FET preamplifiers provide higher sensitivity than the Si-bipolar device.

View solution

Q. What is the abbreviation of HBT?

View solution

Q. What type of receivers are used to provide wideband operation, low-noise operation?

View solution

Q. ___________ circuits extends the dynamic range of the receiver.

View solution

Q. The sensitivity of the low-impedance configuration is ____________

View solution

Q. What is generally used to determine the receiver performance characteristics?

View solution

Q. The __________ technique eliminates the thermal noise associated with the feedback resistor in the trans-impedance front end design.

View solution

Q. The removal of the feedback resistor in the optical feedback technique allows reciever sensitivity of the order of _______________

View solution

Q. The optical feedback technique is useful at low transmission rates.

View solution

Q. How many types of optical amplifier technologies are available.

View solution

Q. The optimum filter bandwidth is typically in the range ________________

View solution