Q. In charpy test specimen, the angle of v-notch section is ____________

View solution

Q. The slump would not exceed 50 mm when compacting concrete with vibrators.

View solution

Q. When vibrators are used for compaction, the consistency of concrete depends upon the ___________

View solution

Q. Which of the following statement is correct while compacting concrete with vibrators?

View solution

Q. The levelling operation that removes humps and hollows and give a true, uniform concrete surface is called ____________

View solution

Q. The final operation of finishing the concrete surface is called _____________

View solution

Q. The process of removing the irregularities from the surface of concrete left after screeding is called floating.

View solution

Q. The process of hardening the concrete mixes by keeping its surface moist for a certain period is called ____________

View solution

Q. After the curing of 28 days, the concrete gains strength upto _____________

View solution

Q. The construction joints in cement concrete ___________

View solution

Q. For compacting large sections of mass concrete in structures, the type of vibrator used is ________________

View solution

Q. What is flexural strength?

View solution

Q. What is equivalent flexural load?

View solution

Q. What is equivalent flexural strength?

View solution

Q. What is equivalent flexural strength ratio?

View solution

Q. Calipers, capable of reading the dimensions of test specimens to an accuracy of ____________

View solution

Q. Rule (ruler/scale), capable of reading the dimensions of test specimens to an accuracy of ________

View solution

Q. Load measuring device shall be capable of measuring loads to an accuracy of ___________

View solution

Q. The tolerances on the cross-section of the test specimens shall be within ± ____________

View solution

Q. The flexural strength (or modulus of rupture) is obtained for the first peak load, Pmax as _______________

View solution