Q. For dynamic balancing of a shaft

View solution

Q. The frictional torque transmitted in a conical pivot bearing, considering uniform pressure, is (where R = Radius of shaft, and α = Semi-angle of the cone)

View solution

Q. The natural frequency of free transverse vibrations is same as that of free longitudinal vibrations.

View solution

Q. The throw of the eccentric is equal to the valve travel.

View solution

Q. The addendum is the radial distance of tooth from the pitch circle to the top of the tooth.

View solution

Q. A disc is a spinning with an angular velocity ω rad/s about the axis of spin. The couple applied to the disc causing precession will be (where I = Mass moment of inertia of the disc, and ωP = Angular velocity of precession of the axis of spin)

View solution

Q. The height of a Watt's governor (in metres) is equal to (where N = Speed of the arm and ball about the spindle axis)

View solution

Q. A slider moving on a fixed link having constant radius of curvature will have its instantaneous centre at the centre of the circle.

View solution

Q. According to Kennedy's theorem, if three bodies move relatively to each other, their instantaneous centres will lie on a

View solution

Q. The tangential component of acceleration of the slider with respect to the coincident point on the link is called coriolis component of acceleration.

View solution

Q. The periodic time is given by (where ω = Angular velocity of the particle in rad/s)

View solution

Q. When two links are connected by a pin joint, their instantaneous centre lies

View solution

Q. When the addenda on pinion and wheel is such that the path of approach and path of recess are half of their maximum possible values, then the length of the path of contact is given by (where r = Pitch circle radius of pinion, R = Pitch circle radius of wheel, and φ = Pressure angle)

View solution

Q. The periodic time of one oscillation for a simple pendulum is

View solution

Q. The relation l = (j + 2) apply only to kinematic chains in which lower pairs are used. This may be used to kinematic chains in which higher pairs are used, but each higher pair may be taken as equivalent to

View solution

Q. According to law of gearing, the common normal at the point of contact between a pair of teeth must always pass through the pitch point.

View solution

Q. The motion between a pair which takes place in __________ is known as incompletely constrained motion.

View solution

Q. The direction of linear velocity of any point on a link with respect to another point on the same link is

View solution

Q. The periodic time of a compound pendulum is __________ when the distance between the point of suspension and the centre of gravity is equal to the radius of gyration of the body about its centre of gravity.

View solution

Q. When the pitching of a ship is upward, the effect of gyroscopic couple acting on it will be

View solution