Q. Diaphragm of a surveying telescope is held inside

View solution

Q. In a precision traverse, included angles are measured by setting the vernier

View solution

Q. Pick up the correct statement from the following :

View solution

Q. If the length of a transition curve to be introduced between a straight and a circular curve of radius 500 m is 90 m, the maximum perpendicular offset for the transition curve, is

View solution

Q. The magnetic bearing of a line is 32° and the magnetic declination is 10° 15' W. The true bearing is

View solution

Q. If deflection angles are measured in a closed traverse, the difference between the sum of the right-hand and that of the left hand angles should be equal to

View solution

Q. Locating the position of a plane table station with reference to three known points, is known as

View solution

Q. If D is the degree of the curve of radius R, the exact length of its specified chord, is

View solution

Q. If the chain line which runs along N-S direction is horizontal and the ground in E-W direction is sloping

View solution

Q. A lens or combination of lenses in which the following defect is completely eliminated is called aplanatic

View solution

Q. While setting a plane table at a station it was found that the error in centering was 30 cm away from the ray of length 40 m drawn from the station. If the scale of the plan is 1 cm = 2 cm, the displacement of the end of the ray in plan from the true position will be

View solution

Q. In precision theodolite traverse if included angles are read twice and the mean reading accepted using both verniers having a least count of 30". Assuming the instrument to be in perfect adjustment, linear measurements correct to 6 mm per 30 metre tape duly corrected for temperature, slope and sag, the angular error of closure not to exceed (where n is the number of traverse legs)

View solution

Q. Straight, parallel and widely spaced contours represent

View solution

Q. The theodolites used for making tacheometric observations by optical wedge system, are

View solution

Q. Tilt of the staff in stadia tacheometry increases the intercept if it is

View solution

Q. To orient a plane table at a point with two inaccessible points, the method generally adopted, is

View solution

Q. The combined effect of curvature and refraction over a distance L kilometres is

View solution

Q. Number of links per metre length of a chain are

View solution

Q. Staff readings on pegs x and y from X station are 1.755 m and 2.850 m, and from station Y on staff head at Y and X are 0.655 m and 1.560 m. If reduced level of X is 105.5 m, the reduced level of Y is

View solution

Q. The constant vertical distance between two adjacent contours, is called

View solution