Q. A temperature sensistive transducer is subjected to sudden temperature change. It takes 10 seconds for transducer to reach equilibrium condition (five times time constant). The time taken to reach half of temperature difference will be

View solution

Q. The most commonly used moving iron instruments are

View solution

Q. A moving iron instrument can be used for

View solution

Q. Two voltmeters are each 0-300 V range. Their internal resistances are 10 kΩ and 20 kΩ They are connected is series and a voltage of 400 V is applied. Their readings respectively will be

View solution

Q. A 300 V voltmeter has an accuracy of ± 2% of full scale deflection. When the reading is 222 V, the actual voltage

View solution

Q. In a thermocouple two metal junctions between metals M1 and M2 are kept at temperature T1 and T2. The thermocouple emf is produced because

View solution

Q. Hay's bridge is suitable for inductances having low L/R ratio.

View solution

Q. Moving iron instrument can be used for ac only.

View solution

Q. In electronic voltmeters the measuring device is a

View solution

Q. An ammeter has a resistance of 50 ohms and a shunt of 0.01 Ω. The deflection is θ. If the shunt resistance is increased to 0.02 Ω, the deflection will be.

View solution

Q. Assertion (A): Double Kelvin's bridge is used to measure low resistances.

Reason (R): In low resistance, the contact and lead resistances are very important.

View solution

Q. Shaft encoder is used to measure

View solution

Q. Assertion (A): Hay's bridge in particularly suitable for measuring inductance having a comparatively low resistance.

Reason (R): In Hay's bridge the value of frequency supply must be known.

View solution

Q. The device having highest photo sensitivity is

View solution

Q. Assertion (A): The scale a PMMC ammeter is linear.

Reason (R): The deflecting torque of PMMC is proportional to current in the coil.

View solution

Q. Assertion (A): Moving iron instrument can be used on ac or dc.

Reason (R): In a moving iron instrument deflecting torque is proportional to square of current.

View solution

Q. A land line telemetry system is suitable for distance upto

View solution

Q. Use of high permeability core in moving iron instrument helps in

View solution

Q. The resistance of series field winding is a low resistance.

View solution

Q. The torque in induction wattmeters due to

View solution