Q. In a thermocouple two metal junctions between metals M1 and M2 are kept at temperature T1 and T2. The thermocouple emf is produced because

View solution

Q. Hay's bridge is suitable for inductances having low L/R ratio.

View solution

Q. Moving iron instrument can be used for ac only.

View solution

Q. In electronic voltmeters the measuring device is a

View solution

Q. An ammeter has a resistance of 50 ohms and a shunt of 0.01 Ω. The deflection is θ. If the shunt resistance is increased to 0.02 Ω, the deflection will be.

View solution

Q. Assertion (A): Double Kelvin's bridge is used to measure low resistances.

Reason (R): In low resistance, the contact and lead resistances are very important.

View solution

Q. Shaft encoder is used to measure

View solution

Q. Assertion (A): Hay's bridge in particularly suitable for measuring inductance having a comparatively low resistance.

Reason (R): In Hay's bridge the value of frequency supply must be known.

View solution

Q. The device having highest photo sensitivity is

View solution

Q. Assertion (A): The scale a PMMC ammeter is linear.

Reason (R): The deflecting torque of PMMC is proportional to current in the coil.

View solution

Q. Assertion (A): Moving iron instrument can be used on ac or dc.

Reason (R): In a moving iron instrument deflecting torque is proportional to square of current.

View solution

Q. A land line telemetry system is suitable for distance upto

View solution

Q. Use of high permeability core in moving iron instrument helps in

View solution

Q. The resistance of series field winding is a low resistance.

View solution

Q. The torque in induction wattmeters due to

View solution

Q. During testing of an energy meter, the energy recorded by meter was 0.05 kWh and correct energy was found to be 0.09 kWh. The error and correction respectively are

View solution

Q. Two resistances are : R1 = 36 Ω ± 1.89 Ω and R2 = 75 Ω ± 3.75 Ω. The sum R1 + R2 along with limiting error is

View solution

Q. An instrument of accuracy class 1 can have an error equal to

View solution

Q. An induction wattmeter can be used for ac only.

View solution

Q. To measure a resistance of about 8 ohms we should use

View solution