Q. Which chopper circuit operates in quadrants 1 and 4?

View solution

Q. Which of the following devices has two gates?

View solution

Q. In auxiliary commutated chopper, the peak value of thyristor current is

View solution

Q. The static equalisation circuit for thyristors connected in series is

View solution

Q. The commutation method in an inverter, is

View solution

Q. Inverters find applications in

View solution

Q. When a thyristor is conducting, the voltage drop across it is about

View solution

Q. The use of free wheeling diode in controlled rectifier improves the waveshape of load current.

View solution

Q. As the firing of a thyristor is delayed, the output voltage of a controlled rectifier decreases.

View solution

Q. In a certain inverter circuit each thyristor carries 26.67 A for 60°, 13.33 A for 120° and zero A for 180° of the cycle. The rms current of thyristor is

View solution

Q. The factor η for a UJT is about

View solution

Q. In a single phase full converter fed by a source having inductance, the number of thyristors conducting during overlap is

View solution

Q. The cut in voltages for germanium and silicon diodes respectively as

View solution

Q. Assertion (A): A GTO can be turned on and turned off by gate pulses

Reason (R): A GTO can be turned off by negative gate pulse.

View solution

Q. In a full bridge single phase inverter feeding RLC load

View solution

Q. It is possible to use a freewheeling diode in

View solution

Q. Assertion (A): When the anode current of an SCR starts increasing during turn on process, the anode cathode voltage drop starts decreasing.

Reason (R): During turn on the reverse biased junction in SCR breaksdown.

View solution

Q. An SCR is triggered at 80° in the positive half cycle, only. The rms anode current is 25 A. If the firing angle is changed to 160°, the rms current is likely to be

View solution

Q. The output wave of a cycloconverter consists of a number of segments derived from the input wave.

View solution

Q. A class A chopper has an input voltage of 200 V. Ton = 1.5 ms and Toff = 4.5 ms. The duty cycle, average output voltage and ripple factor respectively are

View solution