Question

When modulation index of an AM wave is increased from 0.5 to 1, the transmitted power

a.

remains the same

b.

increases by 25%

c.

increases by 33.3%

d.

increases by 50%

Answer: (c).increases by 33.3%

Interact with the Community - Share Your Thoughts

Uncertain About the Answer? Seek Clarification Here.

Understand the Explanation? Include it Here.

Q. When modulation index of an AM wave is increased from 0.5 to 1, the transmitted power

Similar Questions

Explore Relevant Multiple Choice Questions (MCQs)

Q. Quantizing error occurs in

Q. In audio cassettes the width of each recording track is

Q. The most commonly used transistor amplifier circuit is

Q. When energy is fed into open wire transmission line the energy may get dissipated due to

Q. Loudness control gives

Q. A mobile telephone has a range of about

Q. If transmitted power is 75 kW, the field strength at 30 km distance will be about

Q. The time required for horizontal blanking is 16% of that for each horizontal line. If horizontal time is 63.5 μs, the horizontal blanking time for each line is about

Q. When the number of quantising levels is 16 in PCM, the number of pulses in a code group will be

Q. A message signal with bandwidth 10 kHz is lower sideband SSB modulated with carrier frequency fc1 = 10⁶ Hz. The resulting signal is then passed though a narrow band frequency modulator with carrier frequency fc2 = 10⁹ Hz. The bandwidth of the output would be

Q. In a PCM system, if the code word length is increased from 6 to 8 bits, the signal to quantization noise ratio improves by the factor.

Q. For 10 bit PCM system, the signal to quantization noise ratio is 62 dB. If the number of bits is increased by 2, then the signal to quantization noise ratio will

Q. The video heads, in VCR, feed the other circuit

Q. A high pulse repetition frequency in a radar

Q. In PCM, the biggest disadvantage as compared to AM is

Q. Which of the following microphones is the cheapest?

Q. If a line is terminated in characteristic impedance Z₀, the input impedance measured at the input will be

Q. In a TV, the output from RF tuner is about

Q. 24 telephone channels, each band limited to 3.4 kHz, are to be time division multiplexed by using PCM, calculate the bandwidth of PCM system for 128 quantization levels and an 8 KHz sampling frequency

Q. A signal is sampled at 8 kHz and is quantized using 8 bit uniform quantizer. Assuming SNRq for a sinusoidal signal, the correct statement for PCM signal with a bit rate of R is

Recommended Subjects

Are you eager to expand your knowledge beyond Electronics and Communication Engineering? We've handpicked a range of related categories that you might find intriguing.

Click on the categories below to discover a wealth of MCQs and enrich your understanding of various subjects. Happy exploring!