Q. Minimum diameter of the tube used for making water manometer should be __________ mm to avoid a correction for the effect of capillarity.

View solution

Q. Which of the following heat treatment processes is used for softening the hardened material ?

View solution

Q. The type of water filter normally employed/ preferred for treating small quantities of water in railway stations and individual industries is the __________ filter.

View solution

Q. The radioactive isotope of hydrogen is

View solution

Q. Refrigerative cooling employed during long distance transportation of food stuffs is normally done by

View solution

Q. Internal cracks in drawn bars are due to

View solution

Q. Yield strength of a polycrystalline metal with an average grain size, d, is proportional to

View solution

Q. Pick out the wrong statement:

View solution

Q. The tensile strength of plastics ranges from __________ kg/mm².

View solution

Q. Grain hardness is measured by the __________ hardness testing method.

View solution

Q. The thermal efficiency of a heat engine giving an output of 4 KW with an input of 10000 Joules/sec is __________ percent.

View solution

Q. During brazing, if the fluxes are entrapped, it results in the

View solution

Q. Maximum heat dissipation occurs from a steel wire (k = 0.5 W/m. k) of 15 mm diameter exposed to air (h = 20W/m² .k), when the insulation thickness is __________ mm.

View solution

Q. All modes of heat transfer i.e., conduction, convection & radiation occur in case of the

View solution

Q. The standard instrument used for calibrating the load applied by universal testing machine is called

View solution

Q. The reductant used in the extraction of magnesium from calcined dolomite via Pidgeon's process is

View solution

Q. With increase in pressure, the saturation temperature of steam

View solution

Q. 'Sterilised zone' around a hazardous chemical industry is an area with __________ km radius around it, in which the total population/inhabitants should be less than 20000 preferably in the upwind direction.

View solution

Q. Pick out the wrong statement. Termination of polymerisation reaction occurs, if the

View solution

Q. A thin, flat & square plate measuring 2 m x 2 m is freely hanging in ambient air at 25°C. It is exposed to the solar radiation falling on one side of the plate at the rate of 500 W/m² . The plate temperature will remain constant at 30°C, if the convective heat transfer co-efficient is __________ W/m² °C.

View solution