Q. Zirconia probe is used for the measurement of

View solution

Q. The root locus method, a pole of a transfer function G(s) is the value of s for which G(s) approaches

View solution

Q. __________ type of element is normally not used in the bimetallic thermometers.

View solution

Q. Suppose that the gain, time constant and dead time of a process with the following transfer function: Gc(s) = 10 exp( - 0.1s)/(0.5s + 1) are known with a possible error of ± 20% of their values. The largest permissible gain Kc of a proportional controller needs to be calculated below taking the values of process gain, time constant and dead time as

View solution

Q. Process degree of freedom indicates __________ number of controllers to be used.

View solution

Q. Characteristic equation is the denominator of __________ loop transfer function.

View solution

Q. Operating range of a temperature measuring instrument is 800 to 1600°C. It could be a/an __________ pyrometer.

View solution

Q. Polarograph is meant for the analysis of

View solution

Q. Which of the following fluid flow measuring devices can measure the largest flow rate ?

View solution

Q. Gas analysis is commonly done using the

View solution

Q. The open loop transfer function of a control system is KR / (1+TS) . This represents

View solution

Q. Thermal conductivity measurement is used for the determination of

View solution

Q. Presence of a small amount of water in the organic systems can be determined by the __________ method.

View solution

Q. Thermal wells used in temperature measurements should have

View solution

Q. Which of the following flow-metering instru-ments is an areameter ?

View solution

Q. Out of the following themocouple wire insulating material, the highest temperature rating is for

View solution

Q. Which is the most suitable instrument for measuring pressure below 3 microns ?

View solution

Q. Routh stability method uses __________ loop transfer function.

View solution

Q. Liquid levels in autocalves are measued by

View solution

Q. E.m.f. generated by thermocouples is of the order of

View solution