Q. Leakage reactance is minimised by _________

View solution

Q. High flux density is due to less turns.

View solution

Q. Ratio error in a P.T. depends on _________

View solution

Q. In a P.T. values of components of currents are negligible.

View solution

Q. Ratio error can be minimised by _________

View solution

Q. Another method of eliminating the ratio error is _________

View solution

Q. How is the voltage ratio dependent on the frequency?

View solution

Q. Increasing secondary burden _____________

View solution

Q. For a given Vₚ the Vₛ __________

View solution

Q. What is effect of the secondary burden on the ratio error?

View solution

Q. Vₚ is leading in phase, while Vₛ is lagging in phase.

View solution

Q. What is the effect of p.f. on secondary burden?

View solution

Q. How is the transformation ratio dependent on the secondary burden?

View solution

Q. Decrease in p.f. makes Vₛ to lead Vₚ.

View solution

Q. At constant voltage how is frequency affected by flux?

View solution

Q. A 50 Hz, bar primary CT has a secondary with 800 turns. The secondary supplies 7 A current into a purely resistive burden of 2 Ω. The magnetizing ampere-turns are 300. The phase angle is?

View solution

Q. A 50 Hz, bar primary CT has a secondary with 500 turns. The secondary supplies 5 A current into a purely resistive burden of 1 Ω. The magnetizing ampere-turns are 200. What is the ratio error at full load, if the iron loss is 1.5 W and magnetizing mmf is 100 A?

View solution

Q. A 1000/5 A, 50 Hz correct transformer has a secondary burden comprising a non-inductance of 1.6Ω. The flux in the core at full load is?

View solution

Q. A 1000/5 A, 50 Hz correct transformer has a secondary burden comprising a non-inductance of 2Ω. What is the ratio error, if the iron loss is 3 W and magnetizing mmf is 250 A?

View solution

Q. A 200/1 Current Transformer (CT) is wound with 400 turns on the secondary on a toroidal core. When it carries a current of 180 A on the primary, the ratio is found to be -0.5%. If the number of secondary turns is reduced by 1, the new ratio error (in %) will be?

View solution