Q. When the axes of the first and last wheels are co-axial, then the train is known as

View solution

Q. The primary unbalanced force is more than the secondary unbalanced force.

View solution

Q. The cam and follower is an example of

View solution

Q. Which of the following statement is correct?

View solution

Q. A point B on a rigid link AB moves with respect to A with angular velocity ω rad/s. The radial component of the acceleration of B with respect to A, is (where vBA = Linear velocity of B with respect to A)

View solution

Q. Critical damping is a function of

View solution

Q. The relation between me number of links (l) and the number of binary joints (j) for a kinematic chain having constrained motion is given by l = l - 2. If the left hand side of this equation is greater than the right hand side, then the chain is

View solution

Q. A Porter governor can not be isochronous.

View solution

Q. The frictional torque transmitted by a cone clutch is same as that of

View solution

Q. When two non-intersecting and non-coplaner shafts are connected by gears, the arrangement is known as helical gearing.

View solution

Q. When the elements of a pair are kept in contact by the action of external forces, the pair is said to be a

View solution

Q. The centrifugal tension in belts

View solution

Q. In a Hartnell governor, the compression of the spring is __________ the lift of the sleeve.

View solution

Q. The controlling force diagram for a spring controlled governor is a curve passing through the origin.

View solution

Q. The lower pairs are __________ pairs.

View solution

Q. The arrangement is called bevel gearing, when two __________ are connected by gears.

View solution

Q. The static balancing is satisfactory for low speed rotors but with increasing speeds, dynamic balancing becomes necessary. This is because, the

View solution

Q. The maximum fluctuation of speed is the

View solution

Q. A single degree of freedom system is given by , with usual notations. It represents

View solution

Q. In a Hartnell governor, the lift of the sleeve is given by (where r1 and r2 = Max. and min. radii of rotation, x = Length of ball arm of the lever, and y = Length of sleeve arm of the lever)

View solution