Q. Pick up the correct statement from the following:

View solution

Q. According to I.S. : 800 - 1871, lacing bars resist transverse shear equal to

View solution

Q. The greatest permissible clear dimension of the web of thickness t in the panel of a plate girder, is restricted to

View solution

Q. As per ISI, rolled steel beam sections are classified into

View solution

Q. Water pressure in a 80 cm water main is 10 kg/cm². The minimum thickness of the metal required for the water main, not to be stressed more than 200 kg/cm², is

View solution

Q. In a tension member if one or more than one rivet holes are off the line, the failure of the member depends upon :

View solution

Q. The size of a butt weld is specified by the effective throat thickness which in the case of incomplete penetration, is taken as

View solution

Q. The thickness of the web of a mild steel plate girder is less than d/200. If only one horizontal stiffener is used, it is placed at

View solution

Q. The load on a lintel is assumed as uniformly distributed if the height of the masonry above it, is upto a height of

View solution

Q. Working shear stress on the gross area of a rivet as recommended by Indian Standards, is

View solution

Q. Pick up the correct statement from the following:

View solution

Q. Stiffeners are used in a plate girder

View solution

Q. The channels get twisted symmetrically with regard to its axis

View solution

Q. The stiff portion of a bearing stiffener is taken equal to

View solution

Q. Effective length of a column effectively held in position at both ends and restrained in direction at one end, is

View solution

Q. The strength of ISA 125 = 75 x 10 mm used as a tie member with its longer leg connected at the ends by 27 mm diameter rivets, is

View solution

Q. Cold driven rivets range from

View solution

Q. The main type of butt joints, is a double cover

View solution

Q. Outstanding length of a compression member consisting of a channel, is measured as

View solution

Q. The equivalent axial load may be defined as the load which produces a stress equal to

View solution