Q. As the diameter of a wire is doubled, the resistance becomes

View solution

Q. A series resonant circuit has R = 10 Ω, L = 1 μH and C = 1 mF. If R is increased to 20 Ω the resonant frequency

View solution

Q. Assertion (A): Two terminal black boxes of R and C can be identified by plotting their static V-I characteristics.

Reason (R): The V-I characteristic of resistance is a straight line of slope R passing through origin.

View solution

Q. The purpose of earthing electric appliances is

View solution

Q. Three impedances (3 + j 4) Ω each are connected in star. The impedances of equivalent delta circuit will be

View solution

Q. A heater is rated at 230 V, 5 A AC. Then

View solution

Q. KCL is a statement of principle of conservation of energy.

View solution

Q. One ampere means the flow of

View solution

Q. When R and C are connected in parallel, phase angle of Y is positive.

View solution

Q. A current of 1 A in the coil of an iron cored electromagnet causes B = 0.5T. If current is 2A, B =

View solution

Q. Two current sources each of rms value 10 A have frequencies 40 Hz and 50 Hz respectively. They are connected in series, the expression for resultant wave is

View solution

Q. To find the current in a 20 Ω resistance connected in a circuit, Norton's theorem is used. IN = 7.5 A. The current though 20 Ω resistance.

View solution

Q. While calculating Norton's resistance, all current sources are short circuited.

View solution

Q. If P = 250 W and p.f. = 0.707 lagging, Q =

View solution

Q. Assertion (A): Energy stored in inductance is LI²/2 and that in capacitance is CV²/2.

Reason (R): Inductance and capacitance are dual of each other.

View solution

Q. A series RLC circuit is at resonance at 200 Hz. If capacitance is increased to four times, the circuit will be in resonance at

View solution

Q. A system function H(s) = s / (s²+4s+100) the resonant frequency in rad/sec and bandwidth in rad/sec. is given by

View solution

Q. The temperature coefficient of copper is 0.00393 at 20° C. At 50° C the temperature coefficient is

View solution

Q. To determine the polarity of voltage drop across a resistor, it is sufficient to know

View solution

Q. A sawtooth current wave is passed through a resistance

View solution