Q. Which one of the following is connect expression of id for figure?

View solution

Q. In figure the current through resistor R

View solution

Q. For an npn transistor connected as shown in the figure VBE = 0.7 volts. Given that reverse saturation current of the junction at room temperature 300K is 10¯¹³A, the emitter current.

View solution

Q. The dc output voltage of the circuit is

View solution

Q. In figure we need an ac ground. The proper value of C is

View solution

Q. For the circuit in figure the output wave shape is

View solution

Q. In figure V0 =

View solution

Q. In figure, ID = 4 mA. Then VS =

View solution

Q. The circuit shown is

View solution

Q. The zener diode in the rectangular circuit shown in the figure has a zener voltage of 5.8 volts and a zener knee current of 0.5 mA. The maximum load current drawn from this circuit ensuring proper functioning over the input voltage range between 20 and 30 volts, is

View solution

Q. In figure, ID = 4 mA. Then VDS =

View solution

Q. In figure, V0 =

View solution

Q. In the circuit of figure diode will conduct

View solution

Q. In figure, V0 =

View solution

Q. The JFET in the circuit shown in figure has an IDSS = 10 mA and Vp = -5V. The value of the resistance Rs for a drain current IDS = 6.4 mA is

View solution

Q. In figure, V0 =

View solution

Q. In the op-amp circuit of figure, V0 =

View solution

Q. In figure the zener has a resistance of 5 ohms. As the load resistance is varied, the output voltage

View solution

Q. The transistor of following figure in Si diode with a base current of 40 μA and ICBO = 0, if VBB = 6V, RE = 2 kΩ and β = 90, IBQ = 20 μA then IEQ =

View solution

Q. In the CE circuit shown in figure the slope of ac load line will be

View solution