Q. Two identical silicon diodes D1 and D2 are connected back to back shown in figure. The reverse saturation current Is of each diode is 10-8 amps and the breakdown voltage VBr is 50 v. Evaluate the voltages VD1 and VD2 dropped across the diodes D1 and D2 assuming KT/q to be 25 m V.

View solution

Q. An one sided abrupt junction has 10²¹/m³ of dopants on the lightly doped side, zero bias voltage and a built-in potential of 0.2 V. The depletion width of abrupt junction.(q = 1.6 x 10¯¹⁹ C, εr =16, ε₀ = 8.87 x 10¯¹² F/m) is

View solution

Q. n-type semiconductors

View solution

Q. In all metals

View solution

Q. The voltage across a zener diode

View solution

Q. Assertion (A): Two transistors one n-p-n and the other p-n-p are identical in all respects (doping, construction, shape, size). The n-p-n transistor will have better frequency response.

Reason (R): The electron mobility is higher than hole mobility.

View solution

Q. In which of the following is the width of junction barrier very small?

View solution

Q. If the reverse voltage across a p-n junction is increased three times, the junction capacitance

View solution

Q. Which of these has highly doped p and n region?

View solution

Q. Measurement of Hall coefficient enables the determination of

View solution

Q. The units for transconductance are

View solution

Q. The mean free path of conduction electrons in copper is about 4 x 10¯⁸ m. For a copper block, find the electric field which can give, on an average, 1 eV energy to a conduction electron

View solution

Q. When a p-n-p transistor is properly biased to operate in active region the holes from emitter.

View solution

Q. Assertion (A): Silicon is preferred over germanium in manufacture of semiconductor devices.

Reason (R): Forbidden gap in silicon is more than that in germanium.

View solution

Q. Assertion (A): A decrease in temperature increases the reverse saturation current in a p-n diode.

Reason (R): When a diode is reverse biased surface leakage current flows.

View solution

Q. At room temperature a semiconductor material is

View solution

Q. The threshold voltage of an n-channel enhancement mode MOSFET is 0.5 when the device is biased at a gate voltage of 3V. Pinch off would occur at a drain voltage of

View solution

Q. Which of these has degenerate p and n materials?

View solution

Q. A Schottky diode clamp is used along with switching BJT for

View solution

Q. In a piezoelectric crystal, applications of a mechanical stress would produce

View solution