Q. A varactor diode is used for

View solution

Q. One eV = 1.602 x 10¯¹⁹ joules.

View solution

Q. Assertion (A): When VDS is more than rated value the drain current in a JFET is very high.

Reason (R): When VDS is more than rated value, avalanche breakdown occurs.

View solution

Q. If ib is plate current, eb is plate voltage and ec is grid voltage the v-i curve of a vacuum triode is ib = 0.003 (eb + kec)ⁿ. Typical values of k and n are

View solution

Q. Electrons can be emitted from a metal surface due to high electric field.

View solution

Q. In an n type semiconductor the fermi level is 0.35 eV below the conduction band, the concentration of donor atoms is increased to three times. The new position of Fermi level will be

View solution

Q. Assertion (A): In a BJT, the base region is very thick.

Reason (R): In p-n-p transistor most of holes given off by emitter diffuse through the base.

View solution

Q. Assertion (A): The behaviour of FET is similar to that of a pentode.

Reason (R): FETs and vacuum triode are voltage controlled devices.

View solution

Q. SCR can be turned on by

1. applying anode voltage at a sufficient fast rate
2. applying sufficiently large anode voltage
3. increasing the temperature of SCR to a sufficiently
4. applying sufficiently large gate current

View solution

Q. When a diode is not conducting, its bias is

View solution

Q. The SCR would be turned OFF by voltage reversal of applied anode-cathode ac supply of frequency of

View solution

Q. The number of valence electrons in a donor atom is

View solution

Q. An electron rises through a voltage of 100 V. The energy acquired by it will be

View solution

Q. Measurement of hall coefficient enables the determination of

View solution

Q. Which of these has 3 layers?

View solution

Q. For an P-channel enhancement type MOSFET determine the drain current if K = 0.278 x 10¯³A/V², VGS = -4V, VT = -2V, Voltage equivalent at 27°C = 26 mV.

View solution

Q. The skin depth of copper is found to be 66 mm at 1 MHz at a certain temperature. At the same temperature and at 2 MHz, the skin depth would be approximately

View solution

Q. When p-n junction is reverse biased the holes in p material move towards the junction and electrons in n material move away from the junction.

View solution

Q. In which material do conduction and valence bands overlap

View solution

Q. For a photoconductor with equal electron and hole mobilities and perfect ohmic contacts at the ends, an increase in illumination results in

View solution