Q. The types of carriers in a semiconductor are

View solution

Q. A potential of 7 V is applied to a silicon diode. A resistance of 1 K ohm is also in series with the diode. The current is

View solution

Q. Assertion (A): The reverse saturation current in a semiconductor diode is 4nA at 20°C and 32 nA at 50°C.
Reason (R): The reverse saturation current in a semiconductor diode doubles for every 10°C rise in temperature.

View solution

Q. Recombination produces new electron-hole pairs

View solution

Q. An amplifier without feedback has a voltage gain of 50, input resistance of 1 kΩ and output resistance of 2.5 kΩ. The input resistance of the current shunt -ve feedback amplifier using the above amplifier with a feedback factor of 0.2 is

View solution

Q. As compared to an ordinary semiconductor diode, a Schottky diode

View solution

Q. Assertion (A): When a high reverse voltage is applied to a p-n junction the diode breaks down.
Reason (R): High reverse voltage causes Avalanche effect.

View solution

Q. As compared to an ordinary semiconductor diode, a Schottky diode

View solution

Q. At very high temperatures the extrinsic semi conductors become intrinsic because

View solution

Q. When a voltage is applied to a semiconductor crystal then the free electrons will flow.

View solution

Q. Ferrite have

View solution

Q. In a p type material the Fermi level is 0.3 eV above valence band. The concentration of acceptor atoms is increased. The new position of Fermi level is likely to be

View solution

Q. In an n-p-n transistor, the majority carriers in the base are

View solution

Q. An LED has a rating of 2 V and 10 mA. It is used along with 6V battery. The range of series resistance is

View solution

Q. The number of doped regions in PIN diode is

View solution

Q. A silicon (PN) junction at a temperature of 20°C has a reverse saturation current of 10 pico Ampere. The reverse saturation current at 40°C for the same bias is approximately.

View solution

Q. In a bipolar transistor the barrier potential

View solution

Q. Crossover distortion behaviour is characteristic of

View solution

Q. If aac for transistor is 0.98 then βac is equal to

View solution

Q. Assertion (A): The conductivity of p type semiconductor is higher than that of intrinsic semiconductor.
Reason (R): The addition of donor impurity creates additional energy levels below conduction band.

View solution